This is a YouTube video I found which is very good it demonstrates the issues and dangers of poor quality and or faulty panels, I am...

I have made this short video explaining a little bit about using a wind turbine with our inverter I hope its useful 😊😊

People often wonder why there are so many fault codes on our inverters, I often get questions asking why will the inverter shut down with...

This video blog discussing new developments and products from the Sunsynk team.

Sunsynk three-phase have inverter with 100% imbalanced load capability Please find the user manuals and data sheets

Jean is the Technical Manager for Sunsynk / Deye SA. He will be base at our support office in Ferndale. His contact number is +27 76858...

You can connect up to 16 inverters in parallel ( 15 on 3 Phase ) that will give your 150 kw Hybrid system To configure multi-inverter...

I have produced some simplified line drawings that may be useful to show customers on how the inverter is wired to the battery. I hope...

Installation guide will be published later in the week

David has some amazing skills and will be a great asset for Global Tech / Sunsynk Please allow David a few weeks to get into to his new...

Below is the video from the training course 25th of March 2 021, presented by Keith Gough discussing the Sunsynk hybrid inverters.

This is a basic introduction to Sunsynk hybrid inverters, if you've already installed our inverters then its probably not for you. If...

Well almost we are working hard on the three phase inverter and we will launch very soon into South

https://www.sunsynk.org/approved-installer We have three categories of approvals. 1. Registered installer, this is an installer who has...

We often get asked about local installers for this reason we are going to collate a limited list of Sunsynk approved installers. Because...

Please find a free copy of our training manuals, part one and part two, part one is for people with very little knowledge of the solar...

This short video is to explain how to set the restart shutdown voltages as opposed to the BMS percentages the inverter looks at both...

1 Set the % or V level when you want the generator to start. ( See the video below ) 2. The generator will automatically stop when the...

A simple explanation of our software